Volume 39 Issue 10
Oct.  2017
Turn off MathJax
Article Contents
Abstract
References
Related Articles
YANG Liu-hua, WANG Hong-jiang, WU Ai-xiang, ZHANG Lian-fu, CHEN Hui. Regulation and a mathematical model of underflow in paste thickeners based on a circular system design[J]. Chinese Journal of Engineering, 2017, 39(10): 1507-1511. DOI: 10.13374/j.issn2095-9389.2017.10.007
Citation: YANG Liu-hua, WANG Hong-jiang, WU Ai-xiang, ZHANG Lian-fu, CHEN Hui. Regulation and a mathematical model of underflow in paste thickeners based on a circular system design[J]. Chinese Journal of Engineering, 2017, 39(10): 1507-1511. DOI: 10.13374/j.issn2095-9389.2017.10.007
shu

Regulation and a mathematical model of underflow in paste thickeners based on a circular system design

  • 1) School of Civil and Environmental Engineering, University of Science and Technology Beijing, Beijing 100083, China

  • 2) Key Laboratory of High-Efficient Mining and Safety of Metal Mines (Ministry of Education), Beijing 100083, China

  • 3) China Gold Association, Beijing 100083, China

More Information
  • Received Date: March 15, 2017
    Graphical Abstract
    • Abstract
  • To assure that compression on the rakes of a deep corn thickener does not stop mixing, an additional circular slurry system, which activates slurry all the time, is employed and running resistance is usually decreased. However, there is still uncertainty on how circular parameters affect underflow properties. This means that the design and application of such systems lack support from scientific theories. Hence, it is necessary to create a study on how circular parameters regulate underflow parameters. Analysis of the circular system mechanism shows that its effect can be divided into two parts and the effect of the system on underflow properties is clarified. In addition, the value of underflow concentration in thickeners is solved based on calculus and finally a mathematical model is produced, which simulates the regulation of underflow properties in thickeners. Using the model, the circular parameters of underflow in thickeners are verified. The experiment indicates that the solid concentration of underflow decreases with circular underflow initiation, then tends to stabilize. Also, the volume fraction of underflow increases in the range of 0.7% -2.2% with ascending circular flow and height. In addition, the time necessary for the solid concentration to stabilize is reversely affected by underflow flow and height. The regression function obtained from experimental statistics shows excellent performance in the model when designing and analyzing circular systems for thickeners.
    • FullText(HTML)
    • References (9)
  • [4]
    Reid C, Bécaert V, Aubertin M, et al. Life cycle assessment of mine tailings management in Canada. J Clean Prod, 2009, 17(4):471
    [10]
    Banfill P F G. The rheology of fresh mortar. Mag Concrete Res, 1991, 43(154):13
    [11]
    Huynh L, Beattie D A, Fornasiero D, et al. Effect of polyphosphate and naphthalene sulfonate formaldehyde condensate on the rheological properties of dewatered tailings and cemented paste backfill. Miner Eng, 2006, 19(1):28
    [12]
    Mangiafico S, Sauzéat C, Di Benedetto H, et al. Quantification of biasing effects during fatigue tests on asphalt mixes:non-linearity, self-heating and thixotropy. Road Mater Pavement Des, 2015, 16(Suppl 2):73
    [13]
    Coussot P, Nguyen Q D, Huynh H T, et al. Avalanche behavior in yield stress fluids. Phys Rev Lett, 2002, 88(17):175501
    [14]
    Roussel N, Le Roy R, Coussot P. Thixotropy modelling at local and macroscopic scales. J Non-Newton Fluid Mech, 2004, 117(2-3):85
    [16]
    Díaz-Zorita M. Effect of deep-tillage and nitrogen fertilization interactions on dryland corn (Zea mays L.) productivity. Soil Till Res, 2000, 54(1-2):11
    [17]
    Li S, Wang X M. Fly-ash-based magnetic coagulant for rapid sedimentation of electronegative slimes and ultrafine tailings. Powder Technol, 2016, 303:20
    [18]
    Zhou Z W, Scales P J, Boger D V. Chemical and physical control of the rheology of concentrated metal oxide suspensions. Chem Eng Sci, 2001, 56(9):2901
    • Related Articles

  • Related Articles

    [1]ZHAO Xin-yu, ZHANG Jiong-ming, LUO Yan-zhao, XIAO Chao, WU Lian. Mathematical model of decarburization processes in RH refining for ultra-low carbon steel[J]. Chinese Journal of Engineering, 2012, 34(8): 876-882. DOI: 10.13374/j.issn1001-053x.2012.08.013
    [2]HAN Yi-hua, WANG Jing-song, LI Yan-zhen, SHE Xue-feng, KONG Ling-tan, XUE Qing-guo. Comprehensive mathematical model of top gas recycling-oxygen blast furnaces[J]. Chinese Journal of Engineering, 2011, 33(10): 1280-1286. DOI: 10.13374/j.issn1001-053x.2011.10.013
    [3]ZHU Qingtian, CHENG Shusen. Mathematical model of burden trajectory in a blast furnace[J]. Chinese Journal of Engineering, 2007, 29(9): 932-936. DOI: 10.13374/j.issn1001-053x.2007.09.037
    [4]Hao Weidong, Gui Weihua, Wu Min. Mathematical Model and Optical Control for Purification Process of Zinc Hydrometallurgy[J]. Chinese Journal of Engineering, 1996, 18(4): 370-373. DOI: 10.13374/j.issn1001-053x.1996.04.016
    [5]Li Sujian, Wu Qingyi. Dynarmic Adjustment Mathematical Models of Producting Logistics in Mixing Charge[J]. Chinese Journal of Engineering, 1995, 17(4): 355-360. DOI: 10.13374/j.issn1001-053x.1995.04.010
    [6]Guan Kezhi, Zhao Haishi, Liu Ping. Mathematical Model of Laminar Cooling of Hot Rolling Process[J]. Chinese Journal of Engineering, 1994, 16(S2): 23-27. DOI: 10.13374/j.issn1001-053x.1994.s2.005
    [7]Li Sujian, Wu Qingyi. Study on Mathematical Models of Production Logistics in Mixing Charge[J]. Chinese Journal of Engineering, 1994, 16(5): 440-445. DOI: 10.13374/j.issn1001-053x.1994.05.008
    [8]Zhou Yunqing, Fang Jianhua. Mathematical Model of Temperature Drop of Molten Steel in Tundish[J]. Chinese Journal of Engineering, 1991, 13(S1): 90-96. DOI: 10.13374/j.issn1001-053x.1991.s1.014
    [9]Zhou Jihua, Guan Kezhi, Liu Jie, Liu Wenzhong. An Mathematical Model of Flow Stress for Hot Strip Mill[J]. Chinese Journal of Engineering, 1991, 13(1): 20-25. DOI: 10.13374/j.issn1001-053x.1991.01.025
    [10]Qiu Xiatao, Li Aixian. Mathematical Models of Heat Transfar and Optimization for the Four-section Oil Fired Continuous Furnace[J]. Chinese Journal of Engineering, 1990, 12(5): 478-483. DOI: 10.13374/j.issn1001-053x.1990.05.013

  • Cited by

    Periodical cited type(6)

    1. 阮竹恩，吴爱祥，焦华喆，李翠平，李公成，莫逸，王洪江. 我国全尾砂料浆浓密研究进展与发展趋势. 中国有色金属学报. 2022(01): 286-301 .
    2. 张峰. 某矿尾砂时变性与充填策略研究. 采矿技术. 2022(06): 36-40 .
    3. Hong Li，Ai-xiang Wu，Hong-Jiang Wang，Hui Chen，Liu-Hua Yang. Changes in underflow solid fraction and yield stress in paste thickeners by circulation. International Journal of Minerals Metallurgy and Materials. 2021(03): 349-357 .
    4. 阮竹恩，吴爱祥，王贻明，王勇，王建栋. 絮凝沉降对浓缩超细尾砂料浆屈服应力的影响. 工程科学学报. 2021(10): 1276-1282 . 本站查看
    5. 罗红英. 基于微积分分类数学模型的关联挖掘改进方法. 现代电子技术. 2019(08): 135-139 .
    6. 王学涛，崔宝玉，魏德洲，宋振国，孟令国. 浓密机内部流场数值模拟研究进展. 金属矿山. 2019(11): 161-168 .

    Other cited types(2)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (965) PDF downloads (26) Cited by(8)
    Related

    Editorial Office of Chinese Journal of Engineering

    Address：No. 30 College Road, Haidian District, BeijingPost Code：100083 Tel：(010)62333436

    Supported by: Beijing Renhe Information Technology Co., Ltd.    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return